Project Proposal Batch SANYO & SAKURAI JJ 2026 #23

 

Project Proposal Batch SANYO & SAKURAI JJ 2026 #23 --> JA'ARIS BIN SAMSUDIN

@@@@@@@@@@@@@@@@@@@@@@@@@@

Student name : MUHAMMAD ALIF ISKANDAR BIN MD FAIZAL

Title : Shuttlecock shooting robot with human positioning detection using Raspberry pi 5 with TensorFlow Lite (TFLite) Inference

Objectives :

1. To detect position of badminton player on the court using TensorFlow Lite (TFLite)

2. To design a shuttlecock shooting mechanism that can automatically shoot shuttlecock opposing the detected player position

3. To enable the robot to move independently within the court while staying inside defined boundaries using omni-wheel

@@@@@@@@@@@@@@@@@@@@@@

Student name : MUHAMMAD NURSYAFIQ BIN KHAIRUL AMREE

Title : Anti-Bullying notification aplication using voice recognition via ESP32 and edge impulse apps

Objectives :

 

@@@@@@@@@@@@@@@@@@@@@@

Student name : AFIQ HAKIMI BIN ALFISHAM

Title : Height Adjustment Pull-up Bar with Counter using Atmega 2560 and Ultrasonic Sensor

Objectives :

 

-ultrasonic sensor will detect user's height

-pull-up bar will move according to user's height + 20 cm and display on lcd display

-ultrasonic sensor will count one complete pull up and display on lcd display

@@@@@@@@@@@@@@@@@@@@@@ --> 

Student name : MUHAMMAD FIRDAUS BIN ASWANDI

Title : Automatic Face Recognition Locker System Using Raspberry Pi 400 For Special Need Children's Aid

Objectives :

 

1. To recognize one of nine children faces using OpenCV combined with Haar Cascade algorithm.

2. To use Raspberry pi 400 GPIO pins to light up the LED and unlock the solenoid lock on the door when one of the nine children is recognized.

3. To use the buzzer as indicator to alert the user if the door is left open for too long

@@@@@@@@@@@@@@@@@@@@@@ --> MOHD ISMAIL BIN JUSOH

Student name : MOHD AQIL DANISH BIN MOHD AZMAN

Title : The Semi-Automatic Motorcycle Seat Cover Stapling System Using Arduino Mega 2560

Objectives :

 

1.To develop a semi-automatic motorcycle seat cover stapling system using arduino mega 2560 as the main controller.

2.To design and develop a controlled stapling mechanism that ensures consistent stapling performance.

3.To utilize sensor to verify that the motorcycle seat cover is properly aligned prior to the stapling proses.

@@@@@@@@@@@@@@@@@@@@@@