Project Proposal Batch SANYO & SAKURAI JJ 2026 #25

 

Project Proposal Batch SANYO & SAKURAI JJ 2026 #25 --> MOHD KHAIRIL HELMI BIN TARMIZI

@@@@@@@@@@@@@@@@@@@@@@@@@@

Student name : MUHAMMAD NAJMI BIN ROSLAN

Title : Spray Painter Robot Using Arduino Mega

Objectives :

1) To design a spray painter robot

2) To implement a control system for spray painter robot

3) To integrate safety features such as limit switch to ensure safe operations

@@@@@@@@@@@@@@@@@@@@@@ --> MOHD RADZI BIN TARMIZI

Student name : MUHAMMAD AKMAL BIN HAIRUL ANUAR

Title : Mini Automated Storage and Retrieval System (ASRS) Using Siemens S7-1200 Programmable Logic Circuit (PLC) with IoT-Enabled Monitoring and Control

Objectives :

 

1. Design and build a functional mini ASRS prototype based on a CIM system concept using Siemens S7-1200

2. To develop a monitoring and control interface accessible via multiple platforms such as desktop or smartphones

3. To integrate sensors and actuators as inputs & outputs into PLC programming environment for real-time system control & monitoring

@@@@@@@@@@@@@@@@@@@@@@

Student name : NUR DURROTUN NASIHAH BINTI MOHD FUAD

Title : SMART IOT-BASED USED COOKING OIL QUALITY DETECTION AND SORTING SYSTEM USING RASPBERRY PI 3 AND ARDUINO MEGA 2560 WITH QR-BASED REWARD MECHANISM

Objectives :

 

To develop a low-cost sensor-based system using Raspberry Pi 3 and Arduino Mega 2560 to measure physical indicators of used cooking oil degradation in real time.

- To implement a rule-based decision mechanism using sensor thresholds to automatically route used cooking oil into three predefined grade levels.

- To integrate IoT data logging for recording system operation and a QR-based reward mechanism for participation incentives.

@@@@@@@@@@@@@@@@@@@@@@

Student name : MUHAMMAD AQIL MUQRI BIN ALI ANUAR

Title : Automatic Elevation Drawer for Worktables using Arduino Mega 2560

Objectives :

 

@@@@@@@@@@@@@@@@@@@@@@

Student name : AMIR HAZIQ BIN MOHD HANIF

Title : Semi-Automated Cardboard Box Flattening Machine for Disposal using Arduino Uno

Objectives :

 

1. To design and fabricate a semi-automated mechanical system capable of flattening small to medium sized cardboard boxes

2. To construct the circuit by integrating electronic components for cardboard box flattening machine operation

3. To develop a control algorithm using the Arduino IDE to coordinate machine operation

@@@@@@@@@@@@@@@@@@@@@@