Project Proposal Batch SANYO & SAKURAI JJ 2026 #27

 

Project Proposal Batch SANYO & SAKURAI JJ 2026 #27 --> Ts. NORIZAM BIN MOHAMED YUSOFF

@@@@@@@@@@@@@@@@@@@@@@@@@@

Student name : MUHAMMAD AIDIL USAID BIN NORAHMAD SAZALI 

Title : MOTORCYCLE RIM BEARING REMOVAL MACHINE USING ESP32-BASED CONTROL SYSTEM

Objectives :

1. To design a mechanical structure capable of removing motorcycle rim bearings without causing damage of the rim.

2. To develop an ESP32-Based control system for controlling hydraulic cylinder movement

3. To measure and determine the optimum hydraulic pressure and force required to removed the bearing

@@@@@@@@@@@@@@@@@@@@@@

Student name : PUTERI CAMALIA NASUHA BINTI NOR'AZNI 

Title : PS2-CONTROLLED AQUATIC TRIMMER BOAT USING ARDUINO MEGA 2560

Objectives :

 

1. To design and develop an operational boat platform capable of maneuvering effectively in water environments.

2. To design a trimming mechanism capable of trimming aquatic plants under water.

3. To control the movement of the boat and the trimming mechanism using a PS2 controller interfaced with Arduino Mega 2560.

@@@@@@@@@@@@@@@@@@@@@@

Student name : NURAFRINA FARZANA BINTI MOHAMAD NAJIB 

Title : PNEUMATIC OYSTER MUSHROOM BLOCK MACHINE USING ESP32 AND BLYNK APPLICATION

Objectives :

 

1)To provide different levels of block compaction (soft, medium, and hard) that suit various oyster mushroom substrate conditions. 

2)To measure and control the compression load of oyster mushroom blocks using a load sensor connected to an ESP32, with data displayed and operation controlled through the Blynk application.

3)To design a pneumatic compaction machine that applies controlled compression to compact oyster mushroom blocks without causing visible damage to the polypropylene bag during operation.

@@@@@@@@@@@@@@@@@@@@@@

Student name : KHAIRATUL AISYAH BINTI KHAIRUL ANUAR

Title : AUTOMATIC FOOD TROLLEY STABILIZER SYSTEM USING ARDUINO MEGA

Objectives :

 

1. To design a tilting platform that can adjust its angle so the food stays level while the trolley moves over sloped surfaces.

2. To control the trolley by stabilizing the platform level using MPU 6050 sensor, Arduino MEGA and high torque servo motor

3. To use a high-torque servo motor to gently and accurately correct the platform position in real time.

@@@@@@@@@@@@@@@@@@@@@@ --> MOHAMED FAHAMI BIN SULAIMAN

Student name : MUHAMMAD DENISH JEFFRY BIN ABDULLAH 

Title : Automated Gift Box Wrapping Machine with variable size sensing by using Arduino mega 2560 and NEMA17 Stepper Motor

Objectives :

1.To design an automated gift box wrapping machine for gifts of varying sizes ranging from kids shoebox to an adult shoebox

2.To develop a stall sensing system to detect gift box dimensions automatically from the stall detection 

@@@@@@@@@@@@@@@@@@@@@@